Search results
Results From The WOW.Com Content Network
The WPS push button (center, blue) on a wireless router showing the symbol defined by the Wi-Fi Alliance for this function. Wi-Fi Protected Setup (WPS) originally, Wi-Fi Simple Config, is a network security standard to create a secure wireless home network. Created by Cisco and introduced in 2006, the purpose of the protocol is to allow home ...
In computer networking, a wireless access point (WAP) (also just access point (AP)) is a networking hardware device that allows other Wi-Fi devices to connect to a wired network or wireless network. As a standalone device, the AP may have a wired or wireless connection to a switch or router, but in a wireless router it can also be an integral ...
Wi-Fi Protected Access. Wi-Fi Protected Access (WPA), Wi-Fi Protected Access 2 (WPA2), and Wi-Fi Protected Access 3 (WPA3) are the three security certification programs developed after 2000 by the Wi-Fi Alliance to secure wireless computer networks. The Alliance defined these in response to serious weaknesses researchers had found in the ...
Near-field communication (NFC) is a set of communication protocols that enables communication between two electronic devices over a distance of 4 centimetres (1.6 in) or less. [ 1 ] NFC offers a low-speed connection through a simple setup that can be used for the bootstrapping of capable wireless connections. [ 2 ]
Techniques. v. t. e. Wi-Fi (/ ˈwaɪfaɪ /) [1][a] is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves. These are the most widely used computer networks, used ...
A wireless network interface controller (WNIC) is a network interface controller which connects to a wireless network, such as Wi-Fi, Bluetooth, or LTE (4G) or 5G rather than a wired network, such as an Ethernet network. A WNIC, just like other NICs, works on the layers 1 and 2 of the OSI model and uses an antenna to communicate via radio waves.
Wireless LAN (WLAN) channels are frequently accessed using IEEE 802.11 protocols. The 802.11 standard provides several radio frequency bands for use in Wi-Fi communications, each divided into a multitude of channels numbered at 5 MHz spacing (except in the 45/60 GHz band, where they are 0.54/1.08/2.16 GHz apart) between the centre frequency of the channel.
This Linksys WRT54GS, a combined router and Wi‑Fi access point, operates using the 802.11g standard in the 2.4 GHz ISM band using signalling rates up to 54 Mbit/s. IEEE 802.11 Wi-fi networks are the most widely used wireless networks in the world, connecting devices like laptops (left) to the internet through a wireless router (right)