Search results
Results From The WOW.Com Content Network
Typically, many rifles use thread diameters in the range between 25–27 mm (0.98–1.06 in). [citation needed] Many older rifles from the first half of the 20th century use a thread pitch around 2 mm (12.7 TPI), while many modern rifle use thread pitches around 1.5 mm (16.93 TPI). Fine threaded systems intended for hand tightening typically ...
Accordingly, the barrel shank was enlarged to 28 mm (1.10 in) diameter with 15.88 mm (0.625 in) of threaded area at 12 threads per inch compared to previous Mauser "small shank" bolt-action designs that had 24.9 mm (0.98 in) diameter with 16.38 mm (0.645 in) of threaded area at 12 threads per inch barrel shanks for additional strength.
7.65×53mm Mauser. Action. Bolt action. Feed system. 5 round fixed box magazine. Sights. Iron sights. The Mauser Model 1893 is a bolt-action rifle commonly referred to as the Spanish Mauser, though the model was adopted by other countries in other calibers, most notably the Ottoman Empire. The M1893 was based on the experimental M1892 rifle ...
The 7.92×57mm Mauser (designated as the 8mm Mauser or 8×57mm by the SAAMI [ 2] and 8 × 57 IS by the C.I.P. [ 3]) is a rimless bottlenecked rifle cartridge. The 7.92×57mm Mauser cartridge was adopted by the German Empire in 1903–1905, and was the German service cartridge in both World Wars. In its prime, the 7.92×57mm Mauser cartridge was ...
The standard designation for a UTS thread is a number indicating the nominal (major) diameter of the thread, followed by the pitch measured in threads per inch.For diameters smaller than 1 / 4 inch, the diameter is indicated by an integer number defined in the standard; for all other diameters, the inch figure is given.
The Mauser Model 1910 was a small self-loading pistol chambered for .25 ACP (6.35 mm). It was introduced in 1910; an updated model chambered for .32 ACP (7.65 mm), the Mauser Model 1914, came out in 1914. Most of these were used by the Wehrmacht and the Kriegsmarine. They were also sold commercially.
The 6.5×57mm Mauser was designed and introduced by Mauser in either 1893 or 1894 for use as a sporting cartridge, created by necking down the 7×57mm Mauser. [2] Due to high recognition of 7.92 mm Patrone 88, the presumed parent to the 7×57mm, it was marketed as M88/57/6.5 mit und ohne Rand in 1920s.
United States Standard thread. United States Standard thread ( USS thread ), also known as Sellers Standard thread, [ 1] Franklin Institute thread[ 1] and American Standard thread, [ 2] is a standard for inch based threaded fasteners and washers. [ 3] The USS standard is no longer supported. It, together with the SAE fastener standard, was ...