Search results
Results From The WOW.Com Content Network
The USB HID class describes devices used with nearly every modern computer. Many predefined functions exist in the USB HID class. These functions allow hardware manufacturers to design a product to USB HID class specifications and expect it to work with any software that also meets these specifications. The same HID protocol is used unmodified ...
The eSATA connector is a more robust SATA connector, intended for connection to external hard drives and SSDs. eSATA's transfer rate (up to 6 Gbit/s) is similar to that of USB 3.0 (up to 5 Gbit/s) and USB 3.1 (up to 10 Gbit/s). A device connected by eSATA appears as an ordinary SATA device, giving both full performance and full compatibility ...
Cyclic redundancy check. A cyclic redundancy check ( CRC) is an error-detecting code commonly used in digital networks and storage devices to detect accidental changes to digital data. [ 1][ 2] Blocks of data entering these systems get a short check value attached, based on the remainder of a polynomial division of their contents.
The most commonly encountered are the "XT" ("set 1") scancodes, based on the 83-key keyboard used by the IBM PC XT and earlier. These mostly consist of a single byte; the low 7 bits identify the key, and the most significant bit is clear for a key press or set for a key release. Some additional keys have an E0 (or rarely, E1 or E2) prefix.
USB-C devices support power currents of 1.5 A and 3.0 A over the 5 V power bus in addition to baseline 900 mA. These higher currents can be negotiated through the configuration line. Devices can also utilize the full Power Delivery specification using both BMC-coded configuration line and legacy BFSK-coded V BUS line. [31]: ยง4.6.2.1
The early USB 1.1 standard could transfer data at 1.5 megabytes per second (slower than SCSI), but the later USB 2.0/3.0 standards can transfer at more than 20/60 megabytes per second in practice. FireWire, or IEEE-1394, is an interface of comparable speed to USB 2.0. Possible FireWire speeds are 25, 50, and 100, 400, and 800 megabits per ...
Paint Pro and Paint Pro Classic: Paint Pro uses NODE+CHROMA version 1.0 and 1.1 to compare and match paint colors between different manufacturers. Scientific Sci-Fi Scanner: NODE+ sensor is an interactive scanner that uses information and data from NASA to give you information about your surroundings using the sensors on your phone.
Barcode reader. A barcode reader or barcode scanner is an optical scanner that can read printed barcodes and send the data they contain to computer. [ 1] Like a flatbed scanner, it consists of a light source, a lens, and a light sensor for translating optical impulses into electrical signals. Additionally, nearly all barcode readers contain ...