Ad
related to: usb pinout
Search results
Results From The WOW.Com Content Network
Micro-USB connectors, which were announced by the USB-IF on January 4, 2007, [14] [15] have a similar width to Mini-USB, but approximately half the thickness, enabling their integration into thinner portable devices. The Micro-A connector is 6.85 by 1.8 mm (0.270 by 0.071 in) with a maximum overmold boot size of 11.7 by 8.5 mm (0.46 by 0.33 in ...
The Mini-USB connectors (Mini-A, Mini-B, Mini-AB) were introduced for mobile devices, but they were quickly replaced by the thinner Micro-USB connectors (Micro-A, Micro-B, Micro-AB). The Type-C connector, also known as USB-C , is not exclusive to USB, is the only current standard for USB, is required for USB4, and is required by other standards ...
The written USB 3.0 specification was released by Intel and its partners in August 2008. The first USB 3.0 controller chips were sampled by NEC in May 2009, [4] and the first products using the USB 3.0 specification arrived in January 2010. [5] USB 3.0 connectors are generally backward compatible, but include new wiring and full-duplex operation.
USB 3.0 Type-A and B connectors are usually blue, to distinguish them from USB 2.0 connectors, as recommended by the specification, [3] and by the initials SS. [4] USB 3.1, released in July 2013, is the successor specification that fully replaces the USB 3.0 specification.
USB4. USB4 ( Universal Serial Bus 4 ), sometimes erroneously referred to as USB 4.0, is the most recent technical specification of the USB (Universal Serial Bus) data communication standard. The USB Implementers Forum originally announced USB4 in 2019. USB4 enables multiple devices to dynamically share a single high-speed data link.
Apple Lightning to USB-A cable. Lightning is an 8-pin digital connector. Unlike the 30-pin dock connector it replaced (and USB Type-A and -B connectors), it is reversible. [20] Most Lightning devices only supported USB 2.0, which has a maximum transfer speed of 480 Mbit/s or 60 MB/s. With USB 2.0, only one lane is in use at a time.
USB On-The-Go ( USB OTG or just OTG) is a specification first used in late 2001 that allows USB devices, such as tablets or smartphones, to also act as a host, allowing other USB devices, such as USB flash drives, digital cameras, mouse or keyboards, to be attached to them. Use of USB OTG allows devices to switch back and forth between the ...
Parallel port. A DB-25 connector often used for a parallel printer port on IBM PC compatible computers, with the printer icon. Micro ribbon 36-pin female, such as on printers and on some computers, particularly industrial equipment and early (pre-1980s) personal computers. The Apple II Parallel Printer Port connected to the printer via a folded ...
Ad
related to: usb pinout