Search results
Results From The WOW.Com Content Network
Therefore, they are generally taxed as 1.5 times [citation needed] their stated physical displacement (1.3 litres becomes effectively 2.0, 2.0 becomes effectively 3.0), although actual power outputs can be higher than suggested by this conversion factor.The nominal displacement of a Wankel engine is 3 times smaller than the physical ...
One cubic inch (assuming an international inch) is equal to: 0.000578704 cubic feet (1 cu ft equals 1,728 cu in) Roughly 1 tablespoon (1.0 U.S. gallon = 256 U.S. tablespoons = 231 cubic inches) About 0.576744 imperial fluid ounces; About 0.554113 US fluid ounces; About 0.06926407 American/English cups; About 0.000450581 imperial bushels
The 5.2 L Magnum, released in 1992, was an evolutionary development of the 318 cu in (5.2 L) LA engine with the same displacement. The 5.2 L was the first of the Magnum upgraded engines, followed in 1993 by the 5.9 L V8 and the 3.9 L V6.
The aluminium and iron turbo housing ran a boost of 5.9 psi at sea level (= boost of 12 inches of mercury which is 41.5 inches of mercury absolute). The methanol-fuelled engine used a steel crankshaft and aluminium alloy pistons. Weight was 120 kg (264.6 lb) and length was 539 mm (21.2 in). [17]
4.342 in × 3 + 3 ⁄ 4 in (110.3 mm × 95.3 mm) bore x stroke, 8 cylinders, each having a bore of 4.342 inch and a stroke of 3.75 inch, results in a displacement of 444.21 cubic inches (7,279.34 cc); for the Pontiac OHC 427 Hemi refers to it as a "TOHC" and lists the bore at 4.257 inch—which, with a stroke of 3.75 inch, results in a ...
The fuel-mass flow restrictor rate of the second-generation FIA Formula 2 Championship engine is roughly rated at 105 kg/h (231 lb/h). The Mecachrome V634 Turbo 3.4-litre single-turbocharged direct-injected Mecachrome V6 engine is an evolution of the GP3 engine, which is the solely supplied engine for the FIA Formula 2 Championship. With the ...
Starting in 2005 (under the GP2 Series name), Formula 2 cars were powered by 4.0 litres (244 cubic inches) V8, four-stroke piston, Otto cycle unleaded gasoline-burning, prototype production-based, naturally-aspirated engines, produced by Mecachrome. Per Formula 2 rules, the engines sold for no more than €70,000 and were rev-limited to 10,000 rpm.
The top-of-the-line model produced 283 hp (211 kW; 287 PS), giving it a 1:1 cubic inch to horsepower ratio; [18] this lowered the Corvette's 0–60 mph (0–97 km/h) to 7.2 seconds. [ 27 ] General Motors would produce more powerful and larger displacement iterations of the small-block, until stringent emission regulations in the late 1960s ...