Search results
Results From The WOW.Com Content Network
The thrust-to-weight ratio is calculated by dividing the thrust (in SI units – in newtons) by the weight (in newtons) of the engine or vehicle. The weight (N) is calculated by multiplying the mass in kilograms (kg) by the acceleration due to gravity (m/s 2 ). The thrust can also be measured in pound-force (lbf), provided the weight is ...
A typical turbocharged V8 diesel engine might have an engine power of 250 kW (340 hp) and a mass of 380 kg (840 lb), giving it a power-to-weight ratio of 0.65 kW/kg (0.40 hp/lb). Examples of high power-to-weight ratios can often be found in turbines. This is because of their ability to operate at very high speeds.
TSFC or SFC for thrust engines (e.g. turbojets, turbofans, ramjets, rockets, etc.) is the mass of fuel needed to provide the net thrust for a given period e.g. lb/(h·lbf) (pounds of fuel per hour-pound of thrust) or g/(s·kN) (grams of fuel per second-kilonewton). Mass of fuel is used, rather than volume (gallons or litres) for the fuel ...
Dimensional weight, also known as volumetric weight, is a pricing technique for commercial freight transport (including courier and postal services ), which uses an estimated weight that is calculated from the length, width and height of a package. The shipping fee is based upon the dimensional weight or the actual weight, whichever is greater.
The flywheel energy densities are 28 kJ/kg (8 W·h/kg); including the stators and cases this comes down to 18.1 kJ/kg (5 W·h/kg), excluding the torque frame. NASA G2 flywheel for spacecraft energy storage. This was a design funded by NASA's Glenn Research Center and intended for component testing in a laboratory environment. It used a carbon ...
The specific weight, also known as the unit weight (symbol γ, the Greek letter gamma ), is a volume-specific quantity defined as the weight per unit volume of a material. A commonly used value is the specific weight of water on Earth at 4 °C (39 °F), which is 9.807 kilonewtons per cubic metre or 62.43 pounds-force per cubic foot.
Clark's rule is a medical term referring to a mathematical formula used to calculate the proper dosage of medicine for children aged 2–17 based on the weight of the patient and the appropriate adult dose. [1] The formula was named after Cecil Belfield Clarke (1894–1970), a Barbadian physician who practiced throughout the UK, the West Indies ...
This volume of CNG at 2,400 psi has the same energy content as one US gallon of gasoline (based on lower heating values: 148,144 BTU/cu ft (1,533.25 kWh/m 3) of CNG and 114,000 BTU/US gal (8.8 kWh/L) of gasoline. [22] Using Boyle's law, the equivalent GGE at 3,600 psi (25 MPa) is 0.51 cubic feet (14 litres; 3.8 US gallons).