Search results
Results From The WOW.Com Content Network
Specifications. All 710 engines are two-stroke 45° V engines. The 710 model was introduced in 1985 and has a 1-inch (25 mm) longer stroke (now 11 in or 279 mm) than the 645 (10 in or 254 mm stroke). The engine is uniflow scavenged with four poppet exhaust valves in the cylinder head. For maintenance, a power assembly, consisting of a cylinder ...
The Ford Model Tused a 177 cu in (2.9 L) sidevalve, reverse-flow cylinder headinline 4-cylinder engine. It was primarily a gasoline engine. It produced 20 hp (14.9 kW) for a top speed of 45 mph (72 km/h). It was built in-unit with the Model T's novel transmission(a planetary design), sharing the same lubricating oil.
The engine was dropped from production in 1998. [1] The CB-40 was re-engineered to overcome problems of vibration and cooling in the original design. [2] Suited for ultralight use and single seat light sport aircraft, the engine weighs 86 lbs and produces 40 hp (30 kW). The engine uses a short aluminum crankcase with redesigned oil galleries ...
The GMD SD40-2F is a 3,000 horsepower (2,200 kW) C-C diesel locomotive built by General Motors Diesel. It was fundamentally an SD40-2 in a cowl unit full-width body. A total of 25 units were built solely for the Canadian Pacific Railway. They were delivered in 1988 and 1989, after the end of production for the regular SD40-2.
Boeing C-32A. Ilyushin Il-96M. The Pratt & Whitney PW2000, also known by the military designation F117 and initially referred to as the JT10D, is a series of high-bypass turbofan aircraft engines with a thrust range from 37,000 to 43,000 lbf (160 to 190 kN). Built by Pratt & Whitney, they were designed for the Boeing 757.
A cowl unit is a diesel locomotive with full-width, enclosing bodywork, similar in appearance to the cab unit -style of earlier locomotives, such as the EMD F-units of the 1940s and 1950s. The term cowl unit is of North American origin, although similarly-styled locomotives exist elsewhere. Unlike a cab unit, whose body is both an enclosure and ...
Newcomen's engine was only replaced when James Watt improved it in 1769 to avoid this problem (Watt had been asked to repair a model of a Newcomen engine by Glasgow University; a small model that exaggerated the problem). In the Watt steam engine, condensation took place in an exterior condenser unit, attached to the steam cylinder via a pipe ...
Horsepower. One imperial horsepower lifts 550 pounds (250 kg) by 1 foot (30 cm) in 1 second. Horsepower ( hp) is a unit of measurement of power, or the rate at which work is done, usually in reference to the output of engines or motors. There are many different standards and types of horsepower.