Search results
Results From The WOW.Com Content Network
RS-485, also known as TIA-485 (-A) or EIA-485, is a standard, originally introduced in 1983, defining the electrical characteristics of drivers and receivers for use in serial communications systems. Electrical signaling is balanced, and multipoint systems are supported. The standard is jointly published by the Telecommunications Industry ...
There is only one Bus Controller at a time on any MIL-STD-1553 bus. It initiates all message communication over the bus. Figure 1 shows 1553 data bus details: operates according to a command list stored in its local memory; commands the various Remote Terminals to send or receive messages; services any requests that it receives from the Remote ...
In telecommunication and data transmission, serial communication is the process of sending data one bit at a time, sequentially, over a communication channel or computer bus. This is in contrast to parallel communication, where several bits are sent as a whole, on a link with several parallel channels. Serial communication is used for all long ...
ARINC 429 is the most widely used data bus standard for aviation. Electrical and data format characteristics are defined for a two-wire serial bus with one transmitter and up to 20 receivers. The bus is capable of operating at a speed of 100 kbit/s.
FlexRay is a communication bus designed to ensure high data rates, fault tolerance, operating on a time cycle, split into static and dynamic segments for event-triggered and time-triggered communications. Used mainly in aeronautic and automotive sectors.
Fieldbus. A fieldbus is a member of a family of industrial digital communication networks [1] used for real-time distributed control. Fieldbus profiles are standardized by the International Electrotechnical Commission (IEC) as IEC 61784/61158. A complex automated industrial system is typically structured in hierarchical levels as a distributed ...
The Commercial Standard Digital Bus (CSDB) is a multidrop bus, formerly known as the Collins Standard Digital Bus. The maximum speed is 50 kbit/s. [citation needed] Most civilian aircraft use one of 3 serial buses: the Commercial Standard Digital Bus (CSDB), [1] ARINC 429, or AS-15531. The Commercial Standard Digital Bus is a two-wire ...
List of electrical characteristics of single collision domain segment "slow speed" network buses : 548 m (1800ft.) [4] The number of nodes can be limited by either number of available addresses or bus capacitance. None of the above use any analog domain modulation techniques like MLT-3 encoding, PAM-5 etc.