City Pedia Web Search

Search results

1. Results From The WOW.Com Content Network

2. Tap and die - Wikipedia

   en.wikipedia.org/wiki/Tap_and_die

   A tap is used to cut or form the female portion of the mating pair (e.g. a nut ). A die is used to cut or form the male portion of the mating pair (e.g. a bolt ). The process of cutting or forming threads using a tap is called tapping, whereas the process using a die is called threading . Both tools can be used to clean up a thread, which is ...

3. Bolt cutter - Wikipedia

   en.wikipedia.org/wiki/Bolt_cutter

   A bolt cutter, sometimes called bolt cropper, is a tool used for cutting bolts, chains, padlocks, rebar and wire mesh. It typically has long handles and short blades, with compound hinges to maximize leverage and cutting force. A typical bolt cutter yields 20 kilonewtons (4,500 lb f) of cutting force for a 250 newtons (56 lb f) force on the ...

4. List of screw and bolt types - Wikipedia

   en.wikipedia.org/wiki/List_of_screw_and_bolt_types

   Square head cap screws up to and including 3 ⁄ 4 inch (19.05 mm) have a head 1 ⁄ 8 inch (3.175 mm) larger than the shank; screws larger than 3 ⁄ 4 inch (19.05 mm) have a head 1 ⁄ 4 inch (6.35 mm) larger than the shank. [9] In 1919, Dyke defined them as screws that are threaded all the way to the head. [10] socket screw

5. Countersink - Wikipedia

   en.wikipedia.org/wiki/Countersink

   A cross-hole, "Weldon style" or "zero flute" countersink is a cone-shaped tool with a cutting edge provided by a hole that goes through the side of the cone. The intersection of the hole and cone form the cutting edge on the tool. The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool ...

6. British Standard Whitworth - Wikipedia

   en.wikipedia.org/wiki/British_Standard_Whitworth

   In the US, BSW was replaced when steel bolts replaced iron, but was still being used for some aluminium parts as late as the 1960s and 1970s when metric-based standards International Inch replaced the U.S. inch and U.K. inch in 1951-1964. [citation needed] American Unified Coarse (UNC) was originally based on almost the same Imperial fractions ...

7. Gusset plate - Wikipedia

   en.wikipedia.org/wiki/Gusset_plate

   Gusset plates are usually square or rectangular, but can be triangular or made into a customized shape to fit the joint. The shape of each plate is designed so that welding or bolts can be applied to different edges of the plate. [2] A gusset plate can form the entire connection or it can be used in conjunction with bolts or welds. [2]