Search results
Results From The WOW.Com Content Network
The water–cement ratio ( w/c ratio, or water-to-cement ratio, sometimes also called the Water-Cement Factor, f) is the ratio of the mass of water ( w) to the mass of cement ( c) used in a concrete mix: The typical values of this ratio f = w⁄c are generally comprised in the interval 0.40 and 0.60. The water-cement ratio of the fresh concrete ...
Twenty eight days is a long wait to determine if desired strengths are going to be obtained, so three-day and seven-day strengths can be useful to predict the ultimate 28-day compressive strength of the concrete. A 25% strength gain between 7 and 28 days is often observed with 100% OPC (ordinary Portland cement) mixtures, and between 25% and 40 ...
Fig. 1. Changes of pore water content due to drying or wetting processes cause significant volume changes of concrete in load-free specimens. They are called the shrinkage (typically causing strains between 0.0002 and 0.0005, and in low strength concretes even 0.0012) or swelling (< 0.00005 in normal concretes, < 0.00020 in high strength ...
As per Indian codes, compressive strength of concrete is defined as: Field cured concrete in cubic steel molds (Greece) The compressive strength of concrete is given in terms of the characteristic compressive strength of 150 mm size cubes tested after 28 days (fck). In field, compressive strength tests are also conducted at interim duration i.e ...
Instead, it is primarily used as a replacement for compacted backfill. [1] It also flows much better than ordinary concrete, having the consistency of a milkshake. The first known use of CLSM was in 1964. [2] CLSM is typically a ready mix concrete rather than soil cement which is a low strength cement made using local soil, and is similar to a ...
The parts are in terms of weight – not volume. For example, 1-cubic-foot (0.028 m 3) of concrete would be made using 22 lb (10.0 kg) cement, 10 lb (4.5 kg) water, 41 lb (19 kg) dry sand, 70 lb (32 kg) dry stone (1/2" to 3/4" stone). This would make 1-cubic-foot (0.028 m 3) of concrete and would weigh about 143 lb (65 kg). The sand should be ...
Superplasticizers ( SPs ), also known as high range water reducers, are additives used for making high-strength concrete or to place self-compacting concrete. Plasticizers are chemical compounds enabling the production of concrete with approximately 15% less water content. Superplasticizers allow reduction in water content by 30% or more.
Nicknames for entire teams, whole offensive units, defensive units, or special teams. Names which are marked by an asterisk (*) are team nicknames which may have been coined by team members or local media, but never became well known to the public outside of the teams media market for a multitude of reasons, but most likely due to poor performance.