Ads
related to: front end caster adjustmenttoolots.com has been visited by 100K+ users in the past month
Search results
Results From The WOW.Com Content Network
These adjustments are the camber, caster and toe. [2] On some cars, not all of these can be adjusted on every wheel. These three parameters can be further categorized into front and rear (with no caster on the rear, typically not being steered wheels). In summary, the parameters are: Front: Caster (left & right) Front: Camber (left & right)
Front suspension of a race car — the caster angle is formed by the line between upper and lower ball joint. An example of a chopper with a raked fork at an extreme caster angle. The caster angle[ 1] or castor angle[ 2] is the angular displacement of the steering axis from the vertical axis of a steered wheel in a car, motorcycle, bicycle ...
Toe is usually adjustable in production automobiles, even though caster angle and camber angle are often not adjustable. Maintenance of front-end alignment, which used to involve all three adjustments, currently involves only setting the toe; in most cases, even for a car in which caster or camber are adjustable, only the toe will need ...
Ackermann geometry. The Ackermann steering geometry is a geometric arrangement of linkages in the steering of a car or other vehicle designed to solve the problem of wheels on the inside and outside of a turn needing to trace out circles of different radii . It was invented by the German carriage builder Georg Lankensperger in Munich in 1816 ...
Camber angle is one of the angles made by the wheels of a vehicle; specifically, it is the angle between the vertical axis of a wheel and the vertical axis of the vehicle when viewed from the front or rear. It is used in the creation of steering and suspension. If the top of the wheel is farther out than the bottom (that is, tilted away from ...
Torsion bar suspension. Schematic of a front axle highlighted to show torsion bar. A torsion bar suspension, also known as a torsion spring suspension, is any vehicle suspension that uses a torsion bar as its main weight-bearing spring. One end of a long metal bar is attached firmly to the vehicle chassis; the opposite end terminates in a lever ...
A double wishbone suspension is an independent suspension design for automobiles using two (occasionally parallel) wishbone -shaped arms to locate the wheel. Each wishbone or arm has two mounting points to the chassis and one joint at the knuckle. The shock absorber and coil spring mount to the wishbones to control vertical movement.
Lower green: Vehicle frame or unibody member. The MacPherson strut is a type of automotive suspension system that uses the top of a telescopic damper as the upper steering pivot. It is widely used in the front suspension of modern vehicles. The name comes from American automotive engineer Earle S. MacPherson, who invented and developed the design.
Ads
related to: front end caster adjustmenttoolots.com has been visited by 100K+ users in the past month