Search results
Results From The WOW.Com Content Network
In USB 3.0, dual-bus architecture is used to allow both USB 2.0 (Full Speed, Low Speed, or High Speed) and USB 3.0 (SuperSpeed) operations to take place simultaneously, thus providing backward compatibility. The structural topology is the same, consisting of a tiered star topology with a root hub at level 0 and hubs at lower levels to provide ...
The idle line state is when the device is connected to the host with a pull-up on either D+ (for full speed USB 1.x) or D− (for low speed USB 1.x), with transmitter output on both host and device is set to high impedance (hi-Z) (disconnected output). A USB device pulls one of the data lines high with a 1.5 kΩ resistor.
The eXtensible Host Controller Interface ( xHCI) is a technical specification that provides a detailed framework for the functioning of a computer's host controller for Universal Serial Bus (USB). Known alternately as the USB 3.0 host controller specification, xHCI is designed to be backward compatible, supporting a wide range of USB devices ...
Universal Host Controller Interface ( UHCI) is a proprietary interface created by Intel for USB 1.x (full and low speeds). It requires a license from Intel. A USB controller using UHCI does little in hardware and requires a software UHCI driver to do much of the work of managing the USB bus. [ 2] It only supports 32-bit memory addressing, [ 4 ...
The throughput of each USB port is determined by the slower speed of either the USB port or the USB device connected to the port. High-speed USB 2.0 hubs contain devices called transaction translators that convert between high-speed USB 2.0 buses and full and low speed buses. There may be one translator per hub or per port.
USB Attached SCSI. USB Attached SCSI ( UAS) or USB Attached SCSI Protocol ( UASP) is a computer protocol used to move data to and from USB storage devices such as hard drives (HDDs), solid-state drives (SSDs), and thumb drives. UAS depends on the USB protocol, and uses the standard SCSI command set.
USB4 ( Universal Serial Bus 4 ), sometimes erroneously referred to as USB 4.0, is the most recent technical specification of the USB (Universal Serial Bus) data communication standard. The USB Implementers Forum originally announced USB4 in 2019. USB4 enables multiple devices to dynamically share a single high-speed data link.
DisplayLink Corp. DisplayLink (formerly Newnham Research) is a semiconductor and software technology company owned by Synaptics, acquired in August 2020. [ 1] The company specializes in developing DisplayLink USB graphics technology, enabling connections between computers and displays via USB, Ethernet, and WiFi.